پیدا شد 30 محصولات برای "

weldable steel tubing

لوله های فولادی کم آلیاژ جوش داده شده الکتریکی SA423/A423M

SA423/A423M Grade 1 , Grade 2 , Grade 3 electric welded steel pipe , Electric-Welded Low-Alloy Steel Tubes Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes1 1. Scope 1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where corrosion resistance is important. 1.2 The tubing sizes and thicknesses usually furnished

لوله فولادی جوش داده شده با مقاومت الکتریکی 6 - 108 میلی متر OD اندازه مقاومت کششی بالا برای خودرو

JIS G3472 STAM290GA STAM390G Electric resistance welded carbon steel tubes for automobile This Japanese Industrial Standard specifies the electric resistance welded carbon steel tubes designed to be used for automobiles (hereafter referred to as tubes). This Standard is generally applicable to the tubes in the range of 15.9 mm to 101.6 mm in outside diameter. Manufacturing method The manufacturing method shall be as follows. a) The tube shall be manufactured from hot rolled

لوله فولادی جوش داده شده دقیق E195 / E235 / E355 مواد کشیده شده روی سنبه

1. Product Name: Welded Precision Steel Pipe EN10305-2 E195 E235 E355 Drawn Over a Mandrel Steel Pipe 2. Size Range: OD: 6-100mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Good Extending and Bending Ability EN10305-2 Welded Precision Steel Tubes, is produced by cold drawing over mandrel and die on the ERW welded steel tube, to achieve better tolerance and good concentricity, both outside and inside weld seam is completely removed

لوله فولادی جوش داده شده روغنی فولاد کربنی / فولاد منگنز کربنی Astm A178

ASTM A178 Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Steel Tube Application:boiler tubes,boiler flues,superheater flues and safe ends. Size:L--4~12m OD--12.7-127mm WT--0.9-9.1mm Grade:Type A,C and D Manufacture :electric-resistance welding. Heat Treatment:After welding,all tubes shall be heat treated at a temperature of 1650°F[900℃]or higher and followed by cooling in air or in the cooling chamber of a controlled-atmosphere

لوله فولادی بدون درز ASTM A519

AISI 8620 alloy Steel with Quenched and Tempered process cold drawn and cold rolled seamless tubes for rod and shaft Products Description: AISI 8620 alloy Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality low carbon,Low alloy chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardenss is 28-34 HRc. AISI 8620 steel Annealing delivery hardenss less than 250HB. AISI 8620 Alloy structural steel properties

لوله فولادی بلبرینگ AISI 8620

لوله های بخاری هوا لوله فولادی جوش داده شده با مقاومت الکتریکی As2556-2000 1000 - 12000 میلی متر طول

As2556-2000 Electric resistance welded steel air heater tubes Products Description 1 SCOPE This Standard specifies requirements for electric resistance welded steel tubes in the as-welded condition intended for use in air heaters. NOTE: Purchasing guidances are given in Appendix A. 2 APPLICATION This Standard is intended as a design guide for use by manufacturers of air heating exchangers. 3 REFERENCED DOCUMENTS The following Standards are referred to in this Standard: AS or

RSt37 - 2 لوله گرد جوش دقیق , لوله جوش داده شده DIN 2393 Erw با تمرکز یکنواخت

1. Product Name: DIN2393 RSt37-2 St42-2 St52-3 Precision Welded Steel Pipe for with Uniform Concentricity2. Size Range: OD: 6-88mm, WT: 1-10mm, Length: 5.8m/6m, maximal 11.8m3. Stable Quality with Comeptitive Price4. Good Extending and Bending Ability Product NameDIN2393 Precision Welded Cold Drawn Steel PipeMaterialRSt34-2, RSt37-2, St44-2, St52-3Delivery ConditionBK, BKW, BKS, GBK, NBKStandardDIN2393Size RangeOD: 6-88mm, WT: 1-10mmApplicationHigh precision purpose, auto

لوله های فولادی دقیق جوش داده شده با دقت بالا E275 E355 مایعات / تزئینات حمل و نقل گاز

EN10305-2 E155,E195,E235,E275,E355 Welded Cold Drawn DOM Steel Tubes Steel Grade/Steel Material: E155 E195 E235 E275 E355 Delivery Condition: 1 BK Cold finished(hard) 2 BKW Cold finished(soft) 3 BKS Cold finished and stress-relieved 4 GBK Annealed 5 NBK Normalized Size Range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Characteristic: Good concentricity Good OD and ID tolerance High precision Stable quality Smooth roughness DOM Steel Tube Production Process: Raw material → Incoming

قبلی

بعدش

قبلی

صفحه 2 از 4

بعدش